Accutech 800121, Manual

Page: 123 / 156

LC 1200 Manual System Maintenance & Testing 15-1
System
Maintenance & Testing
Tag and Band maintenance
LC units
Testing monitored zones
PLEASE NOTE:
This chapter is intended as a guidance
document only. Each facility should review
these recommendations and modify as
necessary to meet their own unique security
requirements.
Tags and Bands
For information on cleaning Tag and Bands, see
page 3-2.
For information of testing a Tag’s functionality
or a Tag’s battery life, see page 3-5.
LC units
LC unit covers can be cleaned with antibacterial
wipes or hydrogen peroxide.
Testing monitored zones
Zone Functions Tested
Test Equipment Required
Zone, Lock Test
Zone, Egress Test
(3000 and 3101 Magnetic Locks)
Zone, Delayed Egress Test
(3101 Magnetic Locks only)
Zone, Hallway Test
Zone, Elevator Deactivation Test
Zone, Automatic Door Deactivation Test
Fire Panel Interface (FPI) Test
Note: These tests should only be performed by
trained personnel.
This document defines the recommended
periodic testing procedures for the Accutech
security systems. Accutech recommends that
these tests be performed (at the minimum) on a
monthly basis.
Periodic testing of these critical performance
functions can help prevent undetected security
system failures.
Zone Functions Tested
Accutech systems respond to RF signals
generated by the Tags. Most conditions occur at
a monitored zone.
Each exit point around the area of protection
should be evaluated to determine:
if doors lock and/or elevators disable when
a Tag approaches
if alarms are generated due to passage of a
Tag through an exit point
Test Equipment Required
You will need to designate Tags to be used
solely for testing purposes only and a TAD.