ACS-61100 User’s Manual
LCD PANEL CONNECTOR (9)
The LCD panel (not supplied) enables you to configure the card without using the BIOS or
RAIDGuard X GUI.
Hard Disk
Light
Up and Down
menus
Confirm a
command
Return to
previous
menu
Power
Light
Follow the instructions below to use the LCD panel:
1. Use the up and down buttons to cycle through the menus.
2. Press
the
ENT
button to access the menus and confirm a command.
3. Press
the
ESC
button to return to the previous menu.
The button port is used for command selection and setting during the system configuration
stage.
BATTERY MODULE CONNECTOR (10)
The battery module connector is used to attach an ACS-1163 battery backup module
(optional). In the event of the PSU failing on the server during saving and transmission of data
the module will keep the data in the cache memory until the card resumes its work. The BBM
occupies 1 rear blanking slot. Once charged, the BBM will last for more than 72 hours (on
board memory).
24
Summary of Contents for ACS-61100
