![background image](http://html1.mh-extra.com/html/accur8/dws7100/dws7100_user-manual_3793098025.webp)
24
After selecting one of the above options, press the
SET(MODE)
button to resync, and the display will return to
normal mode.
Do not press any buttons
until the synchronisation is complete. The remote search icon
will display constantly for 3 minutes until the signal is reacquired.
5.5 Reset Min/Max record
Note:
If you have more than one thermo-hygrometer sensor, the minimum and maximum value of all
channels will be cleared in the reset mode.
In normal mode, press (do not hold) the
MIN/MAX/-
button
,
the
MAX
icon will be displayed in date area. Press
the
SET/MODE
button to view max values of rainfall (rate, 24h, week or month), pressure (ABS or REL),
outdoor temperature and humidity (AT or dew point), indoor temperature and humidity (temp or dew point) and
sensor temperature and humidity, sensor dew point or heat index.
Press the
MIN/MAX/-
button for three seconds to clear all max values (the rainfall, wind speed, wind gust,
pressure, temperature and humidity maximum values). The maximum values will now display the current
values.
Press the
C
button to switch the display between remote thermo-hygrometer sensors 1 through 8
to view Max values.
Press the
MIN/MAX/-
button again (do not hold), the
MIN
icon will be displayed. Press the
SET/MODE
button
to view min values of pressure (absolute or relative), outdoor temperature/humidity (AT or dew point), indoor
temperature/humidity (temp or dew point), sensor temperature humidity, sensor dew point (dew point or heat
index).
Press the
MIN/MAX/-
button for three seconds to clear all min values. (the pressure, temperature and humidity
minimum values. The minimum values will now display the current values).
Press the
C
button to switch the display between remote thermo-hygrometer sensors 1 through 8
to view Min values.
Press the
SNOOZE
button to exit the min/max checking and clearing mode, return to normal display mode.
5.6 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press the
SNOOZE
button, the backlight will turn on.
The alarm icon will continue to flash and the alarm will silence for five minutes. press any button (
MIN/MAX/+,
SET/MODE, ALARM, C
) to permanently exit the
Snooze
mode.
5.7 Backlight Mode
If the LED is off, Press the
SNOOZE
button once. The backlight will turn on for five seconds, and if no
operation is performed for three seconds, the backlight will turn off.
To save power, the backlight operation is different when operating on batteries.
ADJUSTABLE BACKLIGHT BRIGHTNESS
There are 3 levels of brightness of backlight. When the backlight is on, press SNOOZE button to switch
between the 3 levels.
When the backlight is off, press and hold the
SNOOZE
button for two seconds, the backlight will turn on
permanently, and
BL ON
icon will be displayed for three seconds in the date area.
To turn off the backlight at any time press and hold the
SNOOZE
button for two seconds.
BL OFF
icon will be
displayed for three seconds in the date field.
Note:
If plugged into AC power, the time area will display
“AC ON” and the backlight will remain on. It is
not recommended leaving the backlight on for a long period of time when operating on batteries only, or the
batteries will run down quickly.