![background image](http://html1.mh-extra.com/html/accuniq/bp250/bp250_user-manual_3777455042.webp)
- 42 -
3. RFID card
Machine manager can issue cards through supportive card issuer,
in machine’s delivery, you can issue
it yourself.
When machine manager issues cards, please refer to card issuer or program manual.
1) Setting
In card’s using, you should set CARD ON/OFF in the rear part
by
‘ON’. You choose ‘Magnetic card’ in the menu ‘EXTERNAL CONNECTION’ of ‘SYSTEM SETUP’
2) Measurement
①
Card recognition
You hold your card and then touch on card reader.
If card is recognized normally, it sounds ‘Ttiriring~’, and it
becomes in the state of being ready for measurement.
In connected reverse monitor, ID stored in a card is
displayed in the rear monitor.
(Then, you can put weight and height in the reverse
monitor.)
②
Measurement
If you finish recognizing card, voice guide and message
‘Please press the start button’ comes out. Push the start
button, and then begin to measure.
Summary of Contents for BP250
Page 1: ......
Page 29: ...29 1 CAUTIONS FOR MEASUREMENT MEASUREMENT...
Page 45: ...45 MAINTENANCE...
Page 46: ...46...