![background image](http://html1.mh-extra.com/html/accuniq/bp250/bp250_user-manual_3777455021.webp)
- 21 -
1. CONNECTION ADAPTER
Just connect the power cable to the adapter on the rear and turn the POWER ON/OFF switch on the
lower part of the rear (See the picture).
Caution
In order to avoid the risk of electrical shock, connect this device only to the power
supply equipped with the protective grounding.
Caution
When connecting adaptor, place the arrow mark of adaptor connection
part up and correctly stick it in the socket on the rear of the main body.
Wrong connection could be a fire hazard.
2. LOADING THE PRINT PAPER
①
Check and see if power is turned on.
②
Turn the nut (with a driver on the groove in the middle) on the lower printer cover clockwise to 90
degrees and open the cover.
③
Load the print paper as shown in the picture.
④
Insert the paper edge deep under the black roll, then it comes out above the CUTTER.
⑤
Balance the paper in the right place.
⑥
Cut the paper by pressing the FEED button.
⑦
Close the cover and turn the nut counterclockwise back.
INSTALLATION
Summary of Contents for BP250
Page 1: ......
Page 29: ...29 1 CAUTIONS FOR MEASUREMENT MEASUREMENT...
Page 45: ...45 MAINTENANCE...
Page 46: ...46...