41
% saturation mode—
P3.0: Previous calibration information
This sub group shows you the previous calibration data, along with date and time of
calibration. This is a “view only” parameter.
In % saturation mode:
calibration information is shown in % saturation units.
8.8
From measurement mode:
1.
Press the MODE key
to select %
saturation mode.
2.
Press the SETUP key
to enter SETUP
mode.
3.
Press the
▲
and
▼
keys
to scroll
through subgroups until you view
parameter P3.0 in the lower display.
See figure
4.
Press the ENTER key.
The upper
display shows the calibration data.
See figure
6.
Press the ENTER key
to move back to
subgroup P3.0. If you want to return to
measurement mode, press CAL/MEAS.
NOTE:
If you did not calibrate this meter
in a particular mode, the screen will
show “– – –”.
See figure
A
A
B
B
C
C