AM8060 Precision Thermometer User’s Guide
8/41
probe/probes and temperature difference. This information is
shown in 4 lines, as seen below:
Line 1 is the instrument interface status, including USB flash drive,
wireless communication status and USB to computer interface
status. If the “Udr
”
is shown in Line 1, a USB flash drive is
connected to the USB host interface; if “ZB-xx (where “xx” are
numbers) displays on Line 1 as shown above, it means the Zigbee
wireless data capturing is working; if the display shows
“
USB
”
on
Line 1, then AM8060 is connected via its USB client interface.
Line 2, which is indicated with ‘t1’, shows the measured
temperature of Probe 1 (S1). The
“
SPRT” at the end of the Line 2
tells the type of probe of Probe 1 (S1). The AM8060 supports two
types of probes. “SPRT” indicates a 25Ω or 100 Ω standard
platinum resistance thermometers. “IPRT” indicates a 100Ω
industrial platinum resistance thermometer. The “C” shown at the
end of Line 2 indicates that the temperature is in Celsius.
Line 3, which is indicated with ‘t2’, shows the measured
temperature of Probe 2 (S2).
A “>” will toggle in front of “t1” or ”t2” to indicate which probe is
being measured. Each toggling instance is one measurement.
-4.525
+529.474
-533.98
Line 1
Line 2
Line 3
Line 4
Udr ZB xx USB
>t1 SPRT
C
t2 SPRT
C
t1 t2
C
