AM8060 Precision Thermometer User’s Guide
34/41
c.
The measurement can be started by clicking on “Start”,
stopped by clicking on “Stop”, or quit by clicking on
“Exit”. The default sampling period is 1 second.
The free software “CDRN_USBx2_Reader” also has a data saving
function to save the captured temperature to a file, named
“U_x2data.txt”. Users can also adjust the sampling period for their
requirements. The shortest sampling period is 1 second. The
instructions below detail how to adjust the sampling period.
Find the “Every x Sec” section of the “Data Saving” section at the
right side of the software’s GUI. The unit of the sampling period is
seconds. If a sampling period other than 1 second is required, users
can adjust the value in the box. Any adjustment must be done when
the measurement is in the “Stop” state as shown in the figure above.
To save the captured temperature data, click on “Start”. The
temperature data should be displayed with a blinking tick mark to
indicate the data capturing, then users can click on “REC” to start
the data saving. The phrase “Recording…” will be displayed on the
