AccuLine CNQplus 1000RT, User Manual

Page: 4 / 94

3
1. Safety and EMC Instructions
1.1 Installation
Read installation instructions before connecting to the mains.
Condensation may occur if the UPS is moved directly from a cold to a
warm environment. The UPS must be absolutely dry before being
installed. Please allow an acclimatization time of at least two hours.
Do not install the UPS near water or in a damp environment.
Do not install the UPS where it would be exposed to direct sunlight or
near heat.
Do not connect appliances or items of equipment which would overload
the UPS (e.g. laser printers, etc) to the UPS output.
Place cables in such a way that no one can step on or trip over them.
Assure that the UPS is firmbly placed on earth.
Assure that the external battery source is connected to earth.
Connect the UPS only to a ground-connected shockproof socket outlet.
The building wiring socket outlet (shockproof socket outlet) must be
easily accessible close to the UPS.
With the installation of the equipment, the sum of the leakage current of
the UPS and the connected load must not exceed 3.5mA.
Do not block ventilation openings in the UPS housing. Ensure that the
air vents on the front and rear of the UPS are not blocked. Allow at
least 25cm of space on each side.
Loads and Battery Cabinets connect to the ground through UPS input
power cord. When installing final system configuration, make sure that
all battery cabinets are ground-connected via earth terminals (earth line
ports) and that all loads are connected to the UPS outlets before
switching it on.
An appropriate disconnecting device such as short-circuit backup
protection should be provided in the building wiring installation.
1.1.1 Inspection of Unit
Inspect the UPS upon receiving. If the UPS has been apparently damaged
during shipment, please keep the box and packing material in original form
and notify the carrier and/or dealer immediately.
Please read carefully the following user manual and the safety
instructions before installing the unit or using it!