AccuLine CNQplus 1000RT, User Manual

Page: 30 / 94

29
will be presented circularly. Only one voltage value can be selected among
208V , 220V , 230V , 240V at one time. Only one frequency value can be
selected between 50Hz & 60Hz at one time. Bypass status can be selected
as 000 or 001 (wher 000 means Bypass Disable 001 means Bypass
Enable), the UPS will transfer to bypass mode several seconds after Bypass
Enable is selected, and to no output mode several seconds after Bypass
Disable is selected. Operating mode can be selected among UPS , ECO ,
CVF (where UPS stands for the normal inverter mode, ECO stands for the
high efficiency mode, and CVF stands for the converter mode). The new
mode selected will be active only after the UPS is turned on. The number of
EBMs can be selected from 000 up to 009 (where 000 means no EBM
connected). Load segment 1 can be selected as 000 or 001 (where 000
means load segment 1 off and 001 means load segment 1 on). Load
segment 2 is configured in the same way as Load segment 1. Load segments
are sets of receptacles that can be controlled through the display. Each UPS
this manual for load segments on each UPS model.
Note: This configuration can be set when UPS is in output mode.