119
Acuvim-L
c. “Mail Settings” Webpage
Figure 4-24: “Mail Settings” webpage. Users can choose between 4 mail sending
modes: "Triggerd Sending", "Timed Sending", both "Triggered and Timed
Sending" and "None". Boxes marked with "*" cannot be left blank. "Triggered
Sending" means users will receive mail when the meter detects a new event, such
as an "SOE Event". "Timed Sending" means users can receive mail every 5~1440
minutes (user settable) reporting "Metering", "Energy", "Harmonics", "Max/Min"
and "SOE Record".
Sending Modes can be set as follows:
Setting"Triggered Sending" mode: users can select "SOE Event" as seen in Figure
4-24. Triggered Sending mode is disabled if "SOE Event" is not selected.
Setting"Timed Sending" mode: users enter a number between 5 and 1440
minutes into the box beside "Timed Sending". This number is the interval time
between mail. Sending mode is disabled if 0 is entered. Users can also select
which parameters to receive reports on by checking the checkboxes below
"Timed Sending" in Figure 4-24.Setting both "Triggered Sending" and "Timed
Sending" mode: users follow the steps for both "Triggered Sending" and "Timed
Sending" above.
"None" mode: users disable both "Triggered Sending" and "Timed Sending"
modes.
Note:
Mail Server part includes "SMTP Server", "User Name" and "Password". For
the "SMTP Server" users can input either domain name such as "mail.accuenergy.
com" or an IP address such as "222.128.6.73" which is from "mail.accuenergy.com"
resolved. A user name and password will be required to log in.
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com
