manualshive.com logo in svg

AccuEnergy AcuRev 1310 Series, User Manual, Page: 14 / 109

Share
Download
AccuEnergy AcuRev 1310 Series User Manual Download Page 14

www.accuenergy.com

V: 1.0  Revised: Jan. 2018

AcuRev 1310

12

DIN-Rail Power Meter

2.2 Installation Methods

Environmental

Before installation, please check the environment, temperature, and 
humidity to ensure the AcuRev 1310 series meter is being placed in an 
environment that are within temperature and humidity specifications.

Temperature

AcuRev 1310 operating temperature is -25 ~ 75° C.  Exceeding this temperature range will cause 
damage to the meter and will affect the accuracy and functionality.  Please note this can influ-
ence the meters life negatively if the meter operates in extremely high or extremely low tem-
peratures.  AcuRev 1310 storage temperature range is 40~85° C.

Humidity

5% to 95% non-condensing.

Location

AcuRev 1310 series meter should be installed in a dry and dust free environment.  Avoid expos-
ing the meter to excessive heat, radiation and high electrical noise sources.

Installation Steps:

This product is DIN railed mounted and fits on a standard 35mm rail.

1. To install the meter on the rail insert the top of the rail into the groove on the back of the me-
ter.  Pull the metal clips back and slide the rail across the groove of the meter.

Figure 2-3 Step A

Temperature and humidity 
of the environment must 

accord with the require

-

ment of AcuRev 1310, 
Otherwise it may cause 
the meter damaged.

 Note

Summary of Contents for AcuRev 1310 Series














































































































Reviews:

No comments