Accu-Sort 10, Operation And Maintenance Manual

Page: 7 / 102

V
G
ENERAL
P
RECAUTIONS
Please follow these precautions:
Do not attempt to open the housing. This product contains no user-serviceable
parts. Disassembly of the product will void the warranty. Refer any service to the
Accu-Sort Customer Service Department.
Laser power up to 7 mW could be accessible inside the unit.
•
Avoid staring at the laser beam. Staring at the laser beam for prolonged
periods could result in eye damage (see illustration page vi).
•
Any service should be performed so as not to violate compliance with the
Code of Federal Regulations, Title 21, Part 1040, Section 10 (21 CFR
1040.10), as administered by the Center for Devices and Radiological
Health, a service of the Food and Drug Administration under the Department
of Health and Human Services. Do not attempt to defeat any safety
provisions.
•
Do not create any obstructions of airflow to the unit. Keep the area around
the unit clean to provide for cooling.
•
Learn where the disconnect switches or circuit breakers are for your area.
(Ensure that others using the equipment know this also.)
•
Use shielded interface cables with this product. To maintain FCC
compliance, the cable shield must make a 360
ÛFRQQHFWLRQWRWKHVKLHOGHG
mating connector.
•
Before performing any type of maintenance, turn off power to the unit and
disconnect the power cord.
•
Be certain your hands and the floor of your work area are dry before
touching electrical equipment or connecting cords.
•
Routinely check all connections to your Model 10. If a cable is damaged in
any way, replace it.
•
Check mounting hardware periodically for tightness and stability.
G
ROUNDING THE
M
ODEL
10
The system must be grounded electrically at all times. Please follow these
precautions:
•
Ensure your AC power outlet has a properly grounded receptacle.
•
Do not turn on the system until all components are properly cabled and
grounded with three-conductor AC power cords.