Accu-Chek Perfoma, User Manual

Page: 25 / 100

23
Meter Memory, Setup, and Data Transfer
3
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and
hold until
set-up appears on the
display.
1 2
Press and release
repeatedly until the bell
symbol, oFF , set-up , and
the flashing A-1 appear
on the display.
Press and release
or to switch
between on and oFF .
Press and release to
set your choice.
If
on is selected, the hour
flashes.
3
Press and release
or to adjust the
hour.
Press and release to
set the hour.
The minutes flash.
4
Test reminders:
• beep at the same time each day.
• beep every 2 minutes up to 3 times.
• turn off by inserting a test strip or pressing
any button.
• If a test was performed within 15 minutes
of a test reminder, the test reminder does
not beep.
• If the meter is on at the test reminder time,
the test reminder does not beep.
• Exposure to cold conditions may disable test
reminders until the meter is turned on.
• If a test reminder is off in set-up mode, any
subsequent test reminders are also off. For
example, if you set A-1 but turn off A-2, then
A-3 and A-4 will automatically be off.
Setup
Setting the Test Reminders
NoTe
51820_07054190001_01_EN.indb 23 9/4/13 9:04 AM