Initial Configuration
4-6
4
-
LAN IP Address
– Valid IP addresses consist of four decimal numbers, 0 to
255, separated by periods.The default setting is 192.168.1.1.
-
Netmask
– Indicate the local subnet mask is fixed as 255.255.255.0.
-
Default Gateway
– Normally, for wireless clients and stations in the attached
LAN, the gateway address is the same as the LAN IP address. For a larger LAN
with stations located on other subnets, type the IP address of the default
gateway router in the text field provided.
•
DHCP Service for LAN
— Set the DHCP service configuration of the Mini AP
Router.
-
DHCP Service
– Enable the DHCP server.
-
DHCP Start
– Specify the start IP address of a range that the DHCP server can
allocate to DHCP clients. Note that the address pool range is always in the
same subnet as the unit’s IP setting.
-
Max Client Q’ty
– Specify the maximum number of IP addresses to allocate to
clients.
-
DHCP Lease Time (Minutes)
– Select a time limit for the use of an IP address
from the IP pool. When the time limit expires, the client has to request a new IP
address.
4.
Wireless-VAP1 Configuration
— Sets the wireless Service Set Identifier
(SSID) and wireless security encryption key for the VAP1 wireless network.
Figure 4-6. Setup Wizard - Wireless-VAP1 Settings (AP+WDS Parent Mode)
The displayed items on this page can be described as follows:
Summary of Contents for MR3202A
