manualshive.com logo in svg

Accton Technology ES4512C, Management Manual

Share
Download
Accton Technology ES4512C Management Manual Download Page 317

Interface Commands

4-127

4

Default Setting 

• Auto-negotiation is enabled by default. 
• When auto-negotiation is disabled, the default speed-duplex setting is 100half 

for 100BASE-TX ports and 1000full for Gigabit Ethernet ports.

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage

• To force operation to the speed and duplex mode specified in a 

speed-duplex

 

command, use the 

no negotiation

 command to disable auto-negotiation on 

the selected interface.

• When using the 

negotiation

 command to enable auto-negotiation, the 

optimal settings will be determined by the 

capabilities

 command. To set the 

speed/duplex mode under auto-negotiation, the required mode must be 
specified in the capabilities list for an interface.

Example 

The following example configures port 5 to 100 Mbps, half-duplex operation.

Related Commands 

negotiation (4-127)
capabilities (4-128)

negotiation

This command enables autonegotiation for a given interface. Use the 

no

 form to 

disable autonegotiation.

Syntax 

[

no

]

 negotiation

Default Setting 

Enabled

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

• When auto-negotiation is enabled the switch will negotiate the best settings 

for a link based on the 

capabilities

 command. When auto-negotiation is 

disabled, you must manually specify the link attributes with the 

speed-duplex

 

and 

flowcontrol

 commands.

Console(config)#interface ethernet 1/5
Console(config-if)#speed-duplex 100half
Console(config-if)#no negotiation
Console(config-if)#

Summary of Contents for ES4512C











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands