manualshive.com logo in svg

Accton Technology ES4512C, Management Manual

Share
Download
Accton Technology ES4512C Management Manual Download Page 312

Command Line Interface

4-122

4

Example

This example enables DNS and then displays the configuration.

Related Commands 

ip domain-name (4-118)
ip name-server (4-120)

show hosts

This command displays the static host name-to-address mapping table.

Command Mode 

Privileged Exec

Example

Note that a host name will be displayed as an alias if it is mapped to the same 
address(es) as a previously configured entry.

Console(config)#ip domain-lookup
Console(config)#end
Console#show dns
Domain Lookup Status:
    DNS enabled
Default Domain Name:
    sample.com
Domain Name List:
    sample.com.jp
    sample.com.uk
Name Server List:
    192.168.1.55
    10.1.0.55
Console#

Console#show hosts

Hostname
 rd5
Inet address
 10.1.0.55 192.168.1.55
Alias
 1.rd6
Console#

Summary of Contents for ES4512C











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands