manualshive.com logo in svg

Accton Technology ES4512C, Management Manual

Share
Download
Accton Technology ES4512C Management Manual Download Page 237

System Management Commands

4-47

4

Related Commands

show logging (4-47)

show logging

This command displays the logging configuration, along with any system and event 
messages stored in memory.

Syntax 

show logging

 {

flash

 | 

ram

 | 

sendmail

 | 

trap

}

•

flash

 - Event history stored in flash memory (i.e., permanent memory). 

•

ram

 - Event history stored in temporary RAM (i.e., memory flushed on 

power reset). 

•

sendmail

 - Displays settings for the SMTP event handler (page 4-51).

•

trap

 - Displays settings for the trap function. 

Default Setting 

None

Command Mode 

Privileged Exec

Example

The following example shows that system logging is enabled, the message level for 
flash memory is “errors” (i.e., default level 3 - 0), the message level for RAM is 
“debugging” (i.e., default level 7 - 0), and lists one sample error. 

Console#show logging flash
Syslog logging: Enable
History logging in FLASH: level errors
Console#show logging ram
Syslog logging: Enable
History logging in RAM: level debugging
[0] 02:07:30 01/01/2001
   "STA topology change notification."
   level: 6, module: 6, function: 1, and event no.: 1
Console#

Table 4-18.  show logging flash/ram- display description

Field

Description

Syslog logging

Shows if system logging has been enabled via the 

logging on

 command.

History logging in FLASH The message level(s) reported based on the 

logging history

 command.

History logging in RAM

The message level(s) reported based on the 

logging history

 command.

Messages

Any system and event messages stored in memory.

Summary of Contents for ES4512C











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands