manualshive.com logo in svg

Accton Technology ES4512C, Management Manual

Share
Download
Accton Technology ES4512C Management Manual Download Page 309

DNS Commands

4-119

4

Default Setting 

None

Command Mode 

Global Configuration

Example

Related Commands 

ip domain-list (4-119)
ip name-server (4-120)
ip domain-lookup (4-121)

ip domain-list

This command defines a list of domain names that can be appended to incomplete 
host names (i.e., host names passed from a client that are not formatted with dotted 
notation). Use the 

no

 form to remove a name from this list.

Syntax 

[

no

] 

ip domain-list

 name

name

 - Name of the host. Do not include the initial dot that separates the 

host name from the domain name. (Range: 1-64 characters)

Default Setting 

None

Command Mode 

Global Configuration

Command Usage 

• Domain names are added to the end of the list one at a time. 
• When an incomplete host name is received by the DNS server on this switch, 

it will work through the domain list, appending each domain name in the list to 
the host name, and checking with the specified name servers for a match.

• If there is no domain list, the domain name specified with the 

ip domain-name

 

command is used. If there is a domain list, the default domain name is not used.

Console(config)#ip domain-name sample.com
Console(config)#end
Console#show dns
Domain Lookup Status:
    DNS disabled
Default Domain Name:
    sample.com
Domain Name List:
Name Server List:
Console#

Summary of Contents for ES4512C











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands