Accorroni HUB RADIATOR MINI 11.0, Installation Manual

Page: 42 / 48

42
TESTS CARRIED OUT
SYSTEM VACUUM
□
YES
□
NO EARTHING HOUSE SYSTEM PRESENT
CHECK FOR LEAKS
□
YES
□
NO PRESSURE WITH NITROGEN
□
YES
□
NO
SINGLE UNIT TESTS
□
YES
□
NO ACCUMULATION FILLING CHECK
□
YES
□
NO
CORRECT WIRING
□
YES
□
NO CHECK REINFORCEMENT GROUP
□
YES
□
NO
MEASUREMENT OF MAINS VOLTAGE VALUE VOLT** _______
**ATTENTION! below 215 V do not turn on the machine
MEASURE THE TEMPERATURE WITH ALL BOOSTERS IN OPERATION AND
ANY PHOTOVOLTAIC SYSTEM OFF
OPERATION IN BOOSTER HEAT PUMP 1
EVAPORATION TEMPERATURE O.U. °C (Pb3) .............
_______
TECHNICAL WATER TEMPERATURE °C (Pb1) ................... _______ ATTENTION
CONDENSATION START TEMPERTATURE °C* .......
_______ Wait for the technical water temperature
CONDENSATION START PRESSURE (Bar) ............
_______ reaches at least 50 °C before taking measurements
COMPRESSOR ABSORBED CURRENT (A) .............. _______
* measure the temperature directly on the copper pipe that comes out from the top of the compressor about 8 cm away from the hood
OPERATION IN BOOSTER HEAT PUMP 2
EVAPORATION TEMPERATURE O.U. °C (Pb3) .............
_______
TECHNICAL WATER TEMPERATURE °C (Pb1) ................... _______ ATTENTION
CONDENSATION START TEMPERTATURE °C* .......
_______ Wait for the technical water temperature
CONDENSATION START PRESSURE (Bar) ............ _______ reaches at least 50 °C before taking measurements
COMPRESSOR ABSORBED CURRENT (A) ..............
_______
* measure the temperature directly on the copper pipe that comes out from the top of the compressor about 8 cm away from the hood
OPERATION IN BOOSTER HEAT PUMP 3
EVAPORATION TEMPERATURE O.U. °C (Pb3) .............
_______
TECHNICAL WATER TEMPERATURE °C (Pb1) ...................
_______ ATTENTION
CONDENSATION START TEMPERTATURE °C* .......
_______ Wait for the technical water temperature
CONDENSATION START PRESSURE (Bar) ............ _______ reaches at least 50 °C before taking measurements
COMPRESSOR ABSORBED CURRENT (A) ..............
_______
* measure the temperature directly on the copper pipe that comes out from the top of the compressor about 8 cm away from the hood
OPERATION IN BOOSTER HEAT PUMP 4
EVAPORATION TEMPERATURE O.U. °C (Pb3) ............. _______
TECHNICAL WATER TEMPERATURE °C (Pb1) ...................
_______ ATTENTION
CONDENSATION START TEMPERTATURE °C* ....... _______ Wait for the technical water temperature
CONDENSATION START PRESSURE (Bar) ............
_______ reaches at least 50 °C before taking measurements
COMPRESSOR ABSORBED CURRENT (A) ..............
_______
* measure the temperature directly on the copper pipe that comes out from the top of the compressor about 8 cm away from the hood
OPERATION IN BOOSTER HEAT PUMP 5
EVAPORATION TEMPERATURE O.U. °C (Pb3) ............. _______
TECHNICAL WATER TEMPERATURE °C (Pb1) ...................
_______ ATTENTION
CONDENSATION START TEMPERTATURE °C* ....... _______ Wait for the technical water temperature
CONDENSATION START PRESSURE (Bar) ............
_______ reaches at least 50 °C before taking measurements
COMPRESSOR ABSORBED CURRENT (A) .............. _______
* measure the temperature directly on the copper pipe that comes out from the top of the compressor about 8 cm away from the hood