CALIDO1
DHW heat pump with tank
17
If transport at an angle of inclination cannot be avoided (at a maximum angle of 45° and for a limited period of time), the unit should be operated
one hour after it has been moved to its final upright position.
ATTENTION: Due to the high centre of gravity, and the relatively low overturning moment, the unit must be secured against
tipping over.
ATTENTION: the cover of the unit cannot withstand stress, so it cannot be used for the transport.
ATTENTION: The unit can be inclined only on the opposite side of the handle (see above drawing), namely only on the left-
hand side of the control panel.
The unit is equipped with a handle to make easy the transport. The handle is supplied separately: If necessary, it must be attached with two M8
screws to the two threaded inserts provided.
M8 Inserts
Handle
9.4
REQUIRED SERVICE SPACE
Below you will find the minimum space required to ensure service and maintenance activities on the units.
In addition, recirculation of the exhaust air must be avoided; failure to do so would result in a drop in performance or the activation of safety
controls. For these reasons, the following distances must be observed.
