Accorroni CVCX Series, User& Installer'S Manual

Page: 8 / 32

36
I. 3.1.1 Description of the remote control and relative functions
( C)
。
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
TIMER ON
ECONOMY
ON/OFF
SWING
TIMER OFF
AIR
DIRECTION
RESET LOCK
SETTING TEMP( )
SWING
1
5
5
3
6
10
9
10
11
4
8
8
12
7
2
I. 3.1.2 Description of the display
1
5
6,7
4
2
2
3
8
TIMER ON OFF
1) Transmission indicator appears whenever a signal is transmitted to the internal unit.
2) Operating mode display (MODE): Indicates the selected mode.
3) ON/OFF display: Indicates that the unit is in operation.
4) Temperature display (TEMP): Indicates the set temperature (from 17 °C to 30 °C). When the FAN operating mode
is selected, no temperature is displayed.
5) Lock display: Indicates that the remote control is locked.
6) Timer display (TIMER ON). If you press the TIMER ON key, the timer on time is displayed.
7) Timer display (TIMER OFF). If you press the TIMER OFF key, the timer off time is displayed.
8) Fan speed display (FAN): Indicates the selected fan speed. It may be displayed as AUTO or one of the three
speeds: LOW, (MED) MEDIUM, HIGH.
I. 3.1.3 Using the remote control
The remote control uses two 1.5 V, R03 type AAA batteries (provided). To insert the batteries, remove the cover
completely from the remote control by sliding it downwards. Insert the batteries in the relative housing, making sure
you respect the polarities indicated. Replace the cover and select the desired functions. Follow the same steps when
replacing flat batteries with new batteries. On average the batteries last for around one year.
The remote control display is always on. Remove the batteries from the remote control if you expect not to use it for a
long period of time. Point the remote control towards the unit receiver when setting the various functions. If the signals
are received correctly, the unit will emit a "beep". The remote control is able to transmit up to a distance of around 8
metres from the receiver. Do not expose the remote control to excessive damp, direct sunlight or other heat sources,
and do not subject it to knocks. Protect the remote control from water and other liquids. If the unit's infrared receiver is
exposed to direct sunlight or strong artificial light, or if a fluorescent lamp with electronic switch is placed nearby, the
unit could be subject to operating anomalies or may not work at all. The use of other remote controls in the vicinity or
in the same room as the unit could affect its operation. Do not point other remote control transmitters at the unit
receiver.
(1) Transmits the infrared signals to the unit receiver.
(2) Indicates the unit status and operating modes.
(3) Makes it possible to switch the unit on and off. Press the key once to
switch it on, press it again to switch it off.
(4) Makes it possible to select the desired operating mode (AUTO, COOL,
DRY, HEAT, FAN).
(5) These keys make it possible to set the desired ambient temperature.
▲ the requested temperature is increased up to 30 °C ▼ the requested
temperature is decreased down to 17 °C. Every time the key is pressed
the temperature is changes with 1°C.
(6) Press this key to select the fan speed. When you select AUTO, the fan
speed is automatically regulated on the basis of the ambient temperature.
It is also possible to select the fan speed manually, choosing between 3
settings: LOW, MED (MEDIUM); HIGH.
(7) Makes it possible to set the louver angle.
(8) This key enables the louver to swing vertically (horizontally).
(9) This function is not available in the units.
(10) Press these keys to set the unit on/off timer.
(11) Makes it possible to lock all the remote control functions.
(12) Press this button to reset the remote control settings.