34
English
Appendices
4
Make sure the projection screen is between distance 3.9 to 39.4 feet
(1.2 to 12.0 meters) from the projector. (See page 15)
Problem: The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
4
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
4
If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed
4
Select “Management-->Projection” from the OSD and adjust the
projection direction. (See page 27)
Problem: Lamp burns out or makes a popping sound
4
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will
not turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the “Replacing the Lamp”. (See
page 36)
Problem: LED lighting message
Steady light =>
No light =>
Message
Power-LED
Temp-LED Lamp-LED
(Green)
(Red)
Standby State
(Input power cord)
Warming
Flashing
Normal Mode
Cooling
Flashing
Error (Lamp failed)
Error (Fan failed)
Flashing
Error (Over Temp.)
