ACCO Brands LOUDEN 200 Series, Installation, Operation, Maintenance And Parts Manual

Page: 132 / 144

© Baldor Electric Company
MN1616 (Replaces 499320)
P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Ph: (1) 479.646.4711, Fax (1) 479.648.5792, International Fax (1) 479.648.5895
Dodge Product Support
6040 Ponders Court, Greenville, SC 29615-4617 U.S.A., Ph: (1) 864.297.4800, Fax: (1) 864.281.2433
www.baldor.com
All Rights Reserved. Printed in USA.
5/11 TCP 20,000
*1616-0511*
Bolts to be used on Mounting Feet
and
B5 Output Flanges
In addition to the bolts below, it is recommended that
a lockwasher or other anti-loosening device be used.
Table 4 - Bolts to be used on Mounting Feet
Unit
Size
Red.
Stage
Grade 5 Inch
Grade 8.8
Metric
38
1 3/8-16 UNC M10 x 1.5
2, 3 5/16-18 UNC M8 x 1.25
48
1 1/2-13 UNC M12 x 1.75
2, 3 1/2-13 UNC M12 x 1.75
68
1 5/8-11 UNC M16 x 2
2, 3 5/8-11 UNC M16 x 2
88
1 5/8-11 UNC M16 x 2
2, 3 5/8-11 UNC M16 x 2
108 2, 3 3/4-10 UNC M20 x 2.5
128 2, 3 7/8-9 UNC M24 x 3
148 2, 3 1-1/4-7 UNC M30 x 3.5
168 2, 3 1-1/2-6 UNC M36 x 4
Table 5 - Bolts and Tightening Torque for B5
and
NEMA Output Flanges
(Output flange to gearcase)
Unit
Size
Red.
Stage
Grade 8.8
Metric
Tightening
Torque
(Nm)
Tightening
Torque
(ft-lb)
38
1 M8 25 18
2, 3 M8 25 18
48
1 M8 25 18
2, 3 M10 50 37
68
1 M10 50 37
2, 3 M12 90 66
88
1 M12 90 66
2, 3 M16 210 155
108 2, 3 M16 210 155
128 2, 3 M16 210 155
148 2, 3 M16 210 155
168 2, 3 M20 400 295
LOW VOLTAGE
230V
HIGH VOLTAGE
460V
STANDARD
INTEGRAL
MOTOR
(LINE VOLTAGE
= L1, L2, L3)
INTEGRAL
BRAKE
MOTOR
(NO VFD OR
SOFT START)
INTEGRAL
BRAKE
MOTOR
WITH VFD OR
SOFT START
*BRAKE CAN NOT
BE POWERED
FROM MOTOR
TERMINAL BLOCK
1 2 3
9 8 7
4 5 6
L1 L2 L3
4 5 6
9 8 7
1 2 3
L1 L2 L3
1 2 3
9 8 7
4 5 6
L1 L2 L3
B1 B2
B3 B5
INSULATE B4
4 5 6
9 8 7
1 2 3
L1 L2 L3
B1
B5
INSULATE B3
INSULATE B4
B2
1 2 3
9 8 7
4 5 6
L1 L2 L3
4 5 6
9 8 7
1 2 3
L1 L2 L3
B3 B5
INSULATE B4
*SEPARATE
SINGLE
PHASE
LINE TO
BRAKE
B1
B5
INSULATE B3
INSULATE B4
B2
S1 S2
B1 B2
ADD AUXILIARY SWITCH
BETWEEN B3 AND B5 TO
BE OPEN FOR BRAKING
FAST RESPONSE
BRAKING:
ADD AUXILIARY SWITCH
BETWEEN B1 AND B5 TO
BE OPEN FOR BRAKING
*SEPARATE
SINGLE
PHASE
LINE TO
BRAKE
NOTE: FOR POSITIONING APPLICATIONS AN ADDITIONAL FAST RESPONSE
KIT IS AVAILABLE; ORDER DODGE PART NUMBER 031389 AND FOLLOW
WIRING INSTRUCTIONS THAT COME WITH THE KIT.
S1 S2
BRAKES ARE ELECTROMAGNETICALLY RELEASED;
SPRING SET
Figure 6 - Wiring Diagram for Dual Voltage/
Single Speed Integral Motor