![background image](http://html.mh-extra.com/html/acco-brands/gbc-ricoh-streampunch-ultra/gbc-ricoh-streampunch-ultra_installation-manual_455602006.webp)
Ricoh StreamPunch Ultra/MP Installation Manual
6
b)
Cable Connection for GBC Communications Board:
1. Disconnect the Power Cord.
2. Remove the rear cover of the StreamPunch Ultra/MP.
3. Hold the Rear Cover in place so it doesn’t fall as you remove the M4 X 8 Screws (8) from the Rear Cover.
4. Grasp the Rear Cover by the handle and remove the Rear Cover.
Check the communication board. If it has a jumper move the jumper and the AC power cable to the positions
shown in the table on the next page. If there is no jumper position on the board no change is necessary and the
rear cover can be replaced.
MAIN BOARD
COMMUNICATION
BOARD