Ricoh StreamPunch Ultra/MP Installation Manual
11
8.3 StreamPunch Ultra MP settings
In the StreamPunch Ultra MP LCD go to SETTINGS> PRINTER and select either CHARIS or MARTINI
per the table below. This menu will not appear for StreamPunch Ultra.
Printer
Setting
MP 6503
MP 7503
MP 9003
MARTINI
IM C6500
IM C8000
CHARIS
Note:
This setting is not required when in
Columbia mode see Section 6.b) or with
StreamPunch Ultra
8.4 Functional Test
Functional test the StreamPunch Ultra/ MP system
a) Check to ensure that the paper chip tray is securely in place.
b) Check to ensure that a die set is installed properly and that any extra die sets are securely stored in
the die storage area.
c) Run a small test job in “Bypass” mode. Check to ensure that the job is not punched and bypasses
properly.
d) Run a small job with punch enabled. Check the punched holes of the job.
e) Run each die set to punch 100 sheets or until there is no oil residue around the holes.
8.4 User manual
Print a copy of StreamPunch Ultra/MP User manual from the supplied CD and leave it at the install location
.
