Acclaim Lighting Flood One EO Color, User Manual

Page: 8 / 24

6
www.acclaimlighting.com
USING A TENON MOUNT
Optional tenon mounts are available for use when a Flood One EO Color
needs to be mounted
on top
of a vertical pole. Tenon mounts are available
for use with 2” (50mm) and 4” (100mm) poles of sufficient rigidity for the
weight of the fixture.
IMPORTANT: Tenon mounts are suitable
only for vertical pole mounting
where the fixture sits on top of
the pole. Tenon mounts must
NEVER be used to hang a Flood
One EO Color below a pole.
TO USE A TENON MOUNT
1 Slide the tenon mount onto the
vertical pole and secure using the two
bolts on the side (1/4” /6mm Allen (hex)
wrench required).
2 Fix the Flood One EO Color to the tenon mount
using the supplied main bolt (17mm A/F wrench
required) as shown right.
3 Where required, feed the mains/
control cable into one of the two
access holes and down the pole to
a suitable exit point.
4 Use a suitable silicone sealant to
cap off the cable access holes to
prevent water ingress.
Main
bolt
Pole
bolts