Acclaim Lighting Flood One EO Color, User Manual

Page: 15 / 24

13
www.acclaimlighting.com
DETERMINING SOLO BEHAVIOR
You can choose how the fixture should behave when it is running solo, either because an
external control input is not being used at all or because a connection has been temporarily
lost. There are three SOLO BEHAVIOR choices:
• BLACKOUT
- In this mode, when no external control is present, the emitter outputs will
be extinguished.
•
LAST DMX VALUE
- In this mode, when no external control is present, the emitter
outputs will remain as per the last received instruction.
• INTERNAL PROGRAM
- In this mode, when no external control is present, the fixture can
be made to show a pre-programmed static color.
TO DETERMINE THE SOLO BEHAVIOR
1 Connect the XMT-350 to the DMX input line of the fixture installation.
2 On the XMT-350, press the
MODE button, then use the arrow buttons to highlight the
RDM function and press the button to select. The XMT-350 will search for RDM devices
and after a short while the XMT-350 will display a list of all located fixtures. The fixture
highlighted in the list should show output from its emitters to identify itself.
3 If necessary, use the up/down buttons to highlight an alternative fixture.
4 Press the button to view details for the chosen
fixture and then use the down button to highlight
the
MODEL entry:
FLOOD ONE EO COLOR
MODEL: FLOOD ONE EO COLOR
MAN:
DMX START ADDRESS:
DMX SLOTS:
ACCLAIM LIGHTING
001
4
LABEL: ACCLAIM
DMX PERSONALITY: N/A
FLOOD ONE EO COLOR
MANUAL DIM CH1
MANUAL DIM CH2
MANUAL DIM CH3
MANUAL DIM CH4
SOLO BEHAVIOR
255
0
0
0
BLACKOUT
SOLO BEHAVIOR
BLACKOUT
LAST DMX VALUE
INTERNAL PROGRAM
5 Press the button to view the options:
The first four entries allow you to set the intensity levels for all four channels (CH1 =
red, CH2 = green, etc.). These will be used only if the SOLO BEHAVIOR mode is set to
INTERNAL PROGRAM and the DMX signal is missing. To set a level: Highlight the required
Dim Channel number, press the button and use the up/down buttons to choose the
appropriate value; press the button to save the value.
6 If the Solo Behavior needs to be changed,
highlight the SOLO BEHAVIOR option and press
the button.
7 Highlight the required behavior option and press
the button to save and return to the previous
screen.
8 Press the button to return to the previous
screen.