2
www.acclaimlighting.com
MENU
UP
DOWN
DMX
Pixel Driver 1
GND
Made in P.R.C.
IP20
GND
GND
GND
SPI OUTPUT
Data
NC
+12-24V
D
C
IN
D
M
X
IN
10
A
M
ax
.
D
M
X
O
U
T
+12-24V
Data–
Data–
Data+
Data+
8888
MENU
UP
DOWN
DMX
Pixel Driver 1
GND
Made in P.R.C.
IP20
GND
GND
GND
SPI OUTPUT
Data
NC
+12-24V
D
C
IN
D
M
X
IN
10
A
M
ax
.
D
M
X
O
U
T
+12-24V
Data–
Data–
Data+
Data+
8888
DMX input
Mains
input
Pixel Driver 1
Flex Tube Pixel
DMX output
APS-300-24-IP
PSU
SAFETY
•
When fixtures are mounted off-ground, ensure they are securely fitted to an appropriate
mounting surface.
•
Ensure that the power input is supplied from a correctly fused, earthed and
environmentally protected location.
MAINTENANCE
CAUTION: Always isolate mains power before starting maintenance operations.
•
Ensure that all mounting (and device) screws/bolts are fully tight and free of corrosion.
•
Ensure there is no deformation to the housing, lenses or fixing points.
•
Check that all power supply cables are free from physical damage or material fatigue.
•
Use only genuine spare parts supplied by Acclaim Lighting.
CLEANING
•
Use a moist, lint-free cloth when cleaning each fixture.
•
Never use alcohol or solvents.
SAFETY, MAINTENANCE AND CLEANING
INTRODUCTION
WELCOME
Welcome to the Flex Tube Pixel from Acclaim Lighting. Like all Flex Tubes, these flexible LED
powered strips produce a greatly homogenized light output along their full length. The
difference with the Pixel variant is that it is internally split into 60 separate segments per
16’ (5m). Each segment is individually addressable so that you can apply different mixes of
red, green, blue (and white on some models) colors to each segment. The segments closely
abut each other and, combined with the homogenizing effect of the tube optics, produce
smooth color transitions between the segments. Designed from the outset for external
applications, Flex Tube Pixel strips are rated to IP68 and can be submersed up to 6.5 feet
(2m) in depth, although the IP20-rated controllers need to be fully protected.
Flex Tube Pixel strips can be controlled either individually by their own dedicated Pixel Driver
1 modules (shown above) or multiple strips can be collectively controlled by a Pixel Driver
400 unit (see next page). A 3-wire SPI cable (which combines serial data and DC power) is
used to link each Flex Tube Pixel with its respective controller.
