19
www.acclaimlighting.com
a Use the IP option to configure the IP (Ethernet) address that is being used by the
Art-Net controller. Art-Net is most often broadcast across address spaces in the ranges
002.*.*.* or 010.*.*.*
(where *.*.* can be any series of IP octets)
.
b Use the Mask option to configure an Ethernet subnet mask that matches the IP address
being used. The 2.*.*.* and 10.*.*.* address ranges require a Class-A subnet mask of
255.0.0.0
c Return the cursor to the
<
symbol and click the dial to lock the page.
4 The remaining two pages perform ‘house keeping duties’ that are not directly related to
configuring inputs and outputs.
Lock Setting
< Settings
Factory
< Settings
Factory
Default: No?
Default: No?
V1.07 Update: No?
V1.07 Update: No?
< IP Settings
< IP Settings
IP:002.003.004.005
IP:002.003.004.005
Mask:255.000.000.000
Mask:255.000.000.000
< Settings
Lock
< Settings
Lock
Lock Time: 30s
Lock Time: 30s
Display:Off
Display:Off
3 Rotate the dial to display the
IP Setting
page. Press and release the dial to unlock the
page:
IP Setting
a The Lock Time option determines the interval between the last use of the rotary
dial and a return to the standby screen. Interval options range from 30 seconds to 8
minutes.
b The Display option determines whether the backlight will remain on or off once the
standby screen is displayed. The standby screen is useful for diagnostic purposes but
will be unreadable if the backlight is off.
c Return the cursor to the
<
symbol. Press and release the dial to lock the page.
Factory Setting
a Use the Factory Setting Default option to erase all configuration and return the unit to
its default settings.
b The Update option is a factory option only.
c Return the cursor to the
<
symbol. Press and release the dial to lock the page.
