Manual ETH-DIO-48
10
Chapter 3: Hardware Details
Option Selections
Refer to the settings program on the CD provided with the board. Also, refer to the Block
Diagram and the Option Selection Map when reading this section of the manual.
Figure 3-1: 48 Channel Board Option Selection Map
Ethernet Connector
The Ethernet Connector is an industry standard RJ45 10/100 Base T type with integrated
transmit / receive LEDs.
LED
The LED on the front of the enclosure is used to indicate power/activity.
DC Power Jack
The DC jack has a 2.00mm post and is designed to be used with the AC/DC regulated 5V
external power supply shipped with the standard unit.