Manual ETH-DIO-48
12
Chapter 4: Ethernet Address Information
Use the provided AIOETHW.dll driver to access the Ethernet board.
The unit is shipped from the factory with a default static IP address:
192.168.1.174
Most customers will wish to change this IP address and related network configuration. Our
Settings... program can assist with this process in Windows.
For your information, the device listens on port 51936 for normal operation, and listens on
51937 for upgrading onboard firmware should it become necessary. Under very rare
circumstances you may need to modify your network settings to allow access to these ports.
The firmware supports at most six simultaneous connections during normal operation.
