50
ARS-2021/2021S Copy Smart Plus
Procedures to make the firmware CD disc by yourself:
1. Get the firmware from ACARD through e-mail or directly
download from the web site:
http://www.acard.com
2. Unzip the firmware you have got and write the file “
cdxxx.bin
”
into the root directory of blank CD-R or CD-RW disc. Session of
the CD has to be closed. If the same CD disc still has capacity
Sel burn-in num:
Run Continuous
Sel burn-in num:
Run Continuous
Burn-in
Erase&Copy
12-06. Adv Setup
Burn-in
Burn-in
Test
The data will not be writed on the blank
CD discs and the discs will remain blank
as original after test.
6.12.7 Update Firmware
This function will update your firmware to the latest one. Place
the CD disc which it contain the latest firmware data (firmware
CD disc) into CD-ROM drive, the duplicator will find the data
and update its firmware automatically. During updating, do not
turn off the power of machine since the update will not be
finished till machine reset itself.
Press “ENT” button to enter “Burn-in” and
“ESC” to exit.
Using arrow button to change
“RunContinuous”, “1~10”, “10~100”,
“100~1000” setting. Press “ENT” or “ESC”
button to go back 12-06 manual.
Using arrow button to change
“RunContinuous”, “1~10”, “10~100”,
“100~1000” setting. Press “ENT” or “ESC”
button to go back 12-06 manual.
The system will repeat to erase and write
on the CD-RW discs. It is only for CD-RW
discs to do rewriteable.
