29
ARS-2021/2021S Copy Smart Plus
Src
:
CD-ROM
01 IDE0 Slave
CD-ROM selected!
8
.
Select Source
Press “ENT” button to entry the select source
function or press “ESC” to exit..
When the source is selected, then press “ENT”
button. LCD will show the source information
as on the left.
Then use arrow button to select the CD-ROM,
CD-RW or hard drive as the master source.
9
.
Image
9
-
01
.
Image P
:
A
Load
Load- A -24X 0%
650
.
0MB 74
:
00
6.9 Image
This function will be valid when hard drive is installed in the duplicator.
Otherwise, this function will be showed “No HDD” on the LCD.
Press “ENT” button to enter the selection and
press “ESC” to exit.
6.9.1 Load
Place the master CD disc into the CD-ROM or any one of the CD
writers, the duplicator will detect and analyze the master CD.
Press “ENT” button to load data into the current
partition of the hard drive.
LCD will show the process of “Load”
information.
Duplicator will prompt you an error message when you select the hard drive as a
source and try to copy from a partition that contains without data. Switch to proper
partition or use “Image” function to load the master data to current partition.
