43
ARS-2021/2021S Copy Smart Plus
Eject Disc
Eject All Disc
Eject Disc
Do Not Eject
11-10. Setup
Burn On The Fly
6.11.10 Burn on The Fly
This setting controls the writing methods of CD disc. When the
setting is “On”, the data will direct copy from source drive to the target
drives. When the setting is “Off”, the data will load into a particular
temp. partition in the hard drive. Then the copying data will come
from the source partition.
11-09. Setup
Eject Disc
6.11.9 Eject Disc
This setting controls the ejection of discs by CD writer. Three options
are available: “Eject Good Only” setting will only eject the passed
discs automatically and leave the failed one in the CD writers. “Eject
All Disc” means the CD writers will eject the CD discs no matter
whether operation is successful or failed. “Do Not Eject” means all
discs will remain in CD writers when job is done and you will have to
eject discs from the CD writers manually.
Press “ENT” button to enter “Eject Disc” and
“ESC” to exit
Eject Disc
Eject Good Only
Using arrow button to select “Eject Good Only”,
then press “ENT” or press “ESC” to go back 11-
09 manual.
Using arrow button to select “Eject All Disc”,
then press “ENT” or press “ESC” to go back 11-
09 manual.
Using arrow button to select “Do Not Eject”,
then press “ENT” or press “ESC” to go back 11-
09 manual.
Press “ENT” button to enter “Burn On The Fly”
and “ESC” to exit
