background image

Table of Contents

Chapter 1  Introduction ....................................................................................... 5
1.1 Overview ........................................................................................................ 5
1.2 Features .......................................................................................................... 5
1.3 Specifications ................................................................................................ 6

Chapter 2   Installation Procedure ..................................................................... 7
2.1 Whole duplicator without writer installed ................................................... 7
2.2 Completed duplication system ..................................................................... 7
2.3 Preparing for installation .............................................................................. 8
2.4 Installation of CD-R/RW drive ....................................................................... 9
2.5 Installation of CD-ROM drive ....................................................................... 11
2.6 Installation of 2.5” Hard Disk ...................................................................... 14
2.7 Installation of Copy Smart Plus Cabinet .................................................... 16

Chapter 3  Key Functions and Operating Instruction ...................................... 18

Chapter 4  Board Layout ................................................................................... 21

Chapter 5  Copy Smart Plus as hosted CD drives ........................................... 22
5.1 Connect Copy Plus (ARS-2021S) to host computer ................................... 22
5.2 Configuring Copy Smart Plus ..................................................................... 22
5.3 Hardware requirement ................................................................................ 22
5.4 Software requirement ................................................................................. 22
5.5 Copy Smart Plus DIP switch adjustment .................................................... 23

Chapter 6  Function ........................................................................................... 24
6.1 Copy .............................................................................................................. 24
6.2 Test ................................................................................................................ 24
6.3 Test&Copy ..................................................................................................... 25
6.4 Verify ............................................................................................................. 26
6.5 Compare ....................................................................................................... 26
6.6 Prescan ......................................................................................................... 27
6.7 Disc Info ........................................................................................................ 28
6.8 Select Source .............................................................................................. 28
6.9 Image ............................................................................................................ 29

6.9.1 Load ....................................................................................................... 29
6.9.2 Delete Image .......................................................................................... 30
6.9.3 Image Info .............................................................................................. 30
6.9.4 Compare Image ...................................................................................... 31

Summary of Contents for ARS-2021




























































Reviews: