AEC-6712TU
11
CD-ROM bootable
: Enable to support the SCSI CD-ROM boot.
SCAM support
: Enable to support the SCSI Configuration
Automatically.
Addition Setup Function
:
Boot Target ID: Select Boot Device ID. Default is 0
Boot LUN Number: Select Boot Device LUN. Default is 0
Support for Int13 Extensions(HDD > 8GB): If support for Int13
Extensions ,then OS can use more then 8GB HDD. Default is
Enabled
Include In Scan
: Select the need ID number for scan when boot.
Default is “Y”es.
Ultra SCSI speed
: Select run the Ultra SCSI speed. Default is “Y”es.
ADDITIONAL SETUJP PARAMETERS
Boot Target ID……………………………………….. 0
Boot LUN Number………………………………….. 0
Support for Int13 Extensions (HDD > 8GB)…. Enabled
3.5 DIAGNOSTICS
The Diagnostic function is test the protocol in this card. The message
appears.
3.6 UTILITY
The “Utility” Including the following function,
Preformat
:
Perform the low level format to a physical
drive.
Verify
:
For verify the Hard Disk bad sector status and
reassign.
Quick Erase HDD
:
For erase the Hard Disk partition data.
DIAGNOSTICS
PCI PnP function ............. OK
SCSI core registers...... ..... OK
SCSI data transfer............. OK
<Hit a key to exit>
