AEC-6712TU
10
3.4 ADAPTER SETUP
Host Adapter SCSI ID
: Adapter ID number. Default is “7”
Host Adapter BIOS
: Use host adapter BIOS. Default is “Enable”
PCI Master-DMA Burst Mode
: This selection is whether run the
burst mode for PCI Master DMA. Default is “Enable”
Host adapter SCSI termination
: For SCSI terminator active or non-
active. Default is “Automatic”
Support removable disk as a fixed disk
: This function is for
removable disk select as Fixed disk. Default is “Disable”
Support multiple LUN
: Select use for multiple LUN or not. Default is
“0”
SCSI parity check
: Choose support SCSI parity check or not.
Default is “Disable”
SCSI device disconnection
: Select support SCSI device
disconnection. Default is “Disable”
Extended BIOS transfer for Driver > 1GB
: The “Disable” backward
compatible with the AHA1542B format. Default is “Enable”
Host Adapter SCSI ID..................................................................... 7
Host Adapter BIOS................................................................ Enable
PCI Master-DMA Burst Mode................................................ Enable
ADAPTER PARMETERS
SCSI Device ID
0 1 2 3 4 5 6 7
Include In Scan
Y Y Y Y Y Y Y -
Ultra SCSI speed
Y Y Y Y Y Y Y -
Host Adapter SCSI Termination............................................ Automatic
Support Removable Disk As Fixed Disk................................
Disable
Support LUN# up to Max LUN# As.....................................…….. 0
SCSI parity check....................................................................
Disable
SCSI Device Disconnection.................................................... Disable
Extended BIOS Transfer For Drivers > 1GB..........................
Enable
CD-ROM Bootable.................................................................
Disable
SCAM support .......................................................................
Disable
Addition Setup Function………………..…………………Press [Enter]
