AEC-6712TU
31
4.2.7 SCO UNIX Environment
ACARD PCI Ultra SCSI SCO UNIX 3.2.x DEVICE DRIVER
First, You need a installed SCO UNIX 3.2.x or SCO Open Desktop 3.x
system.
1) Boot your SCO UNIX system.
2) Use doscp command to copy the file AEC671x.tar to your /tmp
directory.
e.g. if you are using CD-ROM drive D, type doscp
D:/Drivers/Scsi/A671xVx.xx/Disk2/scounix/AEC671x.tar /tmp
3) Insert a SCO UNIX-formatted empty diskette(EAFS file system).
4) Now, Mount floppy to directory /topfdd. Type following commands
mount /dev/fd0135ds18 /topfdd (for 1.44MB diskette only,See
follows)
cd /topfdd
tar xvf /tmp/aec671x.tar .
cd /
umount /topfdd
Your floppy drive 0 device name could be:
fd096ds15 —> 5.25 DSHD
fd0135ds18 —> 3.5 DSHD
fd048ds9 —> 5.25 DSDD
fd0135ds9 —> 3.5 DSDD
You are now ready to install the driver package for ACARD PCI SCSI
The ACARD driver diskette can use “custom”(UNIX shell) or “link”(boot
time) to install SCSI driver and rebuild UNIX kernel. Normally “link” is for
boot SCSI device or first time fresh installation.
