Error Codes
Error Code Description
100
Access Code Error, unrecognized access code.
101
EEPROM error, unable to access memory. Please contact Acaia support.
102
AD error, unable to access weighing signal. Please contact Acaia support.
303
Unable to find acceptable starting Zero point, most likely due to loadcell
damage caused by excessive force or drop. Please contact Acaia support.
Over load: the weight is over the maximum capacity.
Under load: the weight is under the minimum capacity.
304
Calibration error. Calibration cannot proceed when environmental noises are
too strong. Please calibrate in a stable environment free of wind, vibration, etc.
904
Password error (the default password is 0000)
_H2O
Water in the Power button
H2O_
Water in the Tare button
_H2O_
Water in the Power button and Tare button
Display Code Description
UPdAtE
The scale is in update mode.
Note: If you want to leave update mode, please connect the scale’s USB to a
power source.
Other
13
