10
5.2
Menu structures
Pressing
▲
or
▼
, it will show
,
and
in turn, Enter to the main interface if
pressing
SET
again ; Be back to the main interface if pressing
ESC
again.
: parameter setting. In the interface, press
SET
to enter the password input interface, and
after that the password is entered correctly, it will display the parameter code, the default is P01. Press
▲
and
▼
to adjust the addition and subtraction of the parameter code. After the selection of the
parameters of the code, press
SET
to confirm, and then enter the parameters interface, and Press
▲
and
▼
to adjust the addition and subtraction of the parameters value. And then press
SET
, to
confirm the parameter values changes, if don’t need to save adjusted parameters, please press
ESC
.
：
Check the parameters. Pressing
▲
or
▼
, it will show T01
、
T02
、
T03
、
T04 in turn , and
the parameters can be shown several seconds later.
：
Show the alarms. Fault alarm code will be shown in the display screen. They will be shown
successively, if there are several alarms one time.
4
SET
Set key
Select function and enter parameter set
5
▲
Up key
Increase value, page up
6
▼
Down key
Decrease value, page down
Summary of Contents for MGA0800/A1
Page 3: ...2 8 Maintenance 14 ...
Page 16: ...15 ...
