SM01P
46
16
TROUBLESHOOTING
To aid in troubleshooting, Parameters 50 through 60 can be accessed without entering the
PASSWORD . Simply press the
Mode
button twice to “skip” over the PASSWORD prompt,
and “P50” will be displayed to indicate that the parameter menu has been entered and
Parameter 50 (FAULT HISTORY) can be viewed . The
and
buttons can then be used
to scroll from Parameter 50 to Parameter 60 . Once the desired parameter is found, press
the
Mode
button to view its “contents” . When finished, press
Mode
to exit the parameter
menu . An example is shown herein:
Press
Mode
once
Upper right decimal point blinks
Display reads "00"
Press
Mode
again
Display reads "P50" (FAULT HISTORY)
Use
and
to scroll to the desired
parameter number
(In this example Parameter 54 has been
selected, which is MOTOR LOAD)
Press
Mode
to view parameter con-
tents (77 = 77% LOAD)
Press
Mode
again to exit
Upper right decimal point blinks
In the example above, Parameter 54 - MOTOR LOAD is being viewed . The “77” in the
example indicates that the load on the motor is 77% of the output current rating of the
drive .
The table herein lists the fault conditions that will cause the drive to shut down, as well
as some possible causes . Contact the factory for more information on troubleshooting
faults .
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
