AC Infinity CONTROLLER 79, Manual

Page: 18 / 44

18
AUTO MODE (LOW TEMPERATURE TRIGGER)
Pressing the up or down button sets the low temperature
trigger. Your device will turn on if the probe’s reading meets
or falls below this threshold.
If the probe’s reading rises above this trigger point, your
device will turn off. This shut off point can be adjusted
using the buffer setting as shown on
page 28.
This is typically used with devices like heaters and seedling
mats to help raise the temperature when it gets too cold.
For example, if you set a low temperature trigger of 40°F,
then your device will activate when the temperature falls
to 40°F or lower, and turn off when it rises above 40°F.
Products shown here may still be in development.
PROGRAMMING
Note that any of the four AUTO Mode triggers can activate at the same time, even if you are not viewing that
specific trigger. Turn off any triggers not in use by pressing the up and down buttons together while viewing that
trigger. Triggers may be delayed from turning off by your Buffer Settings, please see page 27 for more info.
LOW TEMPERATURE
TRIGGER POINT
40
32 194
COLDER HOTTER
ON OFF