AC Infinity ADVANCE GROW, User Manual

Page: 96 / 100

96
CONTROLLER 69
FREQUENTLY ASKED QUESTIONS
Where is the best place to position the sensor probe?
Place the sensor probe as close as possible to the hottest or most humid spot in your space.
Do I need to remove the plastic cap from the probe?
Yes. You will need to remove the plastic cap so the probe can accurately read climate conditions.
What devices are compatible with the CONTROLLER 69?
All AC Infinity devices that contain a UIS connector are compatible. If your AC Infinity device
has a 4-pin Molex connector and an EC-Motor, it may still be compatible with the use of an UIS
adapter to convert its connector to fit with the controller. Q:
A:
Q:
A:
What does “level” refer to in the controller and app?
The level represents the intensity the device is running at. This is represented by a digit 0 to 10.
Zero means the device is off, and 10 represents its running at its maximum. For fan devices,
the level would be referring to its speed. For light devices, the level would be referring to its
brightness. Note that on and off devices do not have a level setting.
Q:
A:
Q:
A:
Why is my device is not turning off when the programming is triggering it to be off?
The figure set in OFF MODE determines the device’s level when it’s triggered to be OFF in all
other modes. Set that figure to zero if you want the device to turn off when triggered OFF. If this
is occurring in AUTO MODE, please check your high and low triggers point which can all activate
concurrently. Turn off any trigger points that are not in use. If you are using the App, please check
if you have any ADVANCE programming which can override any control programing.
Q:
A:
Why does my device not run or run at a low level when the programming is triggering it to
be on?
The figure set in ON MODE determines the device’s level when it’s triggered to be ON in all
other modes. Make sure that figure is not set to zero or the device will not run when it’s triggered
to be ON. If this is occurring in AUTO MODE, please check your high and low triggers point
which can all activate concurrently. Turn off any trigger points that are not in use. If you are using
the App, please check if you have any ADVANCE programming which can override any control
programing. Q:
A: