AC Infinity ADVANCE GROW, User Manual

Page: 79 / 100

79
CONTROLLER 69
PROGRAMMING
AUTO MODE (LOW HUMIDITY
TRIGGER)
Pressing the up or down button sets the
low humidity trigger. The devices will
activate if the probe’s reading meets or
falls below this threshold.
Once triggered, the devices will gradually
ramp up to the level set in ON mode.
If the probe’s reading rises above this
trigger point, the devices will gradually
slow down to a stop or at the level set in
OFF Mode.
You may set this trigger above the high
humidity trigger to create a range in
which the devices are active.
AUTO MODE (HIGH HUMIDITY
TRIGGER)
Pressing the up or down button sets the
high humidity trigger. The devices will
activate if the probe’s reading meets or
exceeds this threshold.
Once triggered, the devices will gradually
ramp up to the level set in ON mode.
If the probe’s reading falls below this
trigger point, the devices will gradually
slow down to a stop or at the level set in
OFF mode.
You may set this trigger below the low
humidity trigger to create a specific range
in which the devices are active.
Any of the four trigger points can activate while
you are in AUTO Mode, even if you are viewing
another trigger point. Please set a trigger point
to OFF if not in use, by holding down the up and
down button.
If there is a level set in OFF Mode other than
zero, the devices will run at that level when
triggered to turn off.
Any of the four trigger points can activate while
you are in AUTO Mode, even if you are viewing
another trigger point. Please set a trigger point
to OFF if not in use, by holding down the up and
down button.
If there is a level set in OFF Mode other than
zero, the devices will run at that level when
triggered to turn off.