15
English
4. Mounting/installation
IMPORTANT!
The camera must be disconnected from the power supply during installation.
Note
You will find installation illustrations in the quick start guide for the camera in question.
4.1. TVIP11561
Mounting the camera
Use the accompanying drilling template or mount for drilling the mounting holes.
The drilling distance is 44 mm.
Orientation of the camera
The direction of the camera can be adjusted using the ball joint; loosen the fixing screws and adjust the
camera.
4.2. TVIP21560
Mounting the camera
Use the accompanying drilling template or mount for drilling the mounting holes.
Drill the holes in advance and insert the accompanying screw anchor.
Use the accompanying screws to fasten the ceiling bracket in place.
Orientation of the camera
Then place the camera onto the ceiling bracket and latch the camera in place by rotating it anti-
clockwise.
Important:
Do not forget to tighten up the screws again!
Important:
Please note that the arrow and the label "FRONT" on the ceiling bracket points in the right
direction.
