26
English
11.1.1. Image
Scheduled Image Settings:
Configure whether you wish to set a common profile for day and night
mode, use an automatic separate day and night profile or a time-
controlled separate day and night profile.
Brightness, contrast:
Adjust these values to suit the ambient conditions.
Saturation, hue:
Adjust these values to suit the ambient conditions.
Sharpness:
set the electronic oversharpening for the image (edge overdraw)
Iris mode:
choose between manual and automatic iris control, depending on your
model. If only one mode is available, then it is the only mode offered.
Exposure time:
select a value for the fixed exposure time.
Day/night switching:
Select a method for switching between day and night mode.
Day: The camera stays in day mode.
Night: the camera stays in night mode.
Auto: Automatic switching according to light conditions
Schedule: switching at fixed times. You must enter the day start time
and day end time.
Triggered by event: switching is performed by triggering the switching
input. The output status can be achieved via the status option if the
input is not triggered.
Delay time:
delay in seconds until switching to day or night mode.
Smart IR:
Prevents glare effects from objects that are too close when IR lighting
is enabled.
BLC:
backlight compensation with reference to a selected area
WDR:
wide dynamic function for improved display of high contrasts. The
WDR level should be reduced if the image displayed is too bright.
Wide dynamic level:
select the WDR level. A higher level may increase image noise.
White balance:
Select between different variants of white balance.
Digital Noise reduction:
Function for reducing noise in the image. The higher the value, the
more noise is removed and the more static the image appears.
Noise reduction level:
select the DNR level
Mirroring:
this setting can be used to mirror the image horizontally or horizontally
and vertically.
Video standard:
Here you can set the mains frequency of the power supply network.
