Abus TVHD80120, User Manual

Page: 93 / 437

Configuration
93
NTP
Note
The recorder can synchronise the time with an ex-
ternal server. Several server addresses are avail-
able on the Internet for this purpose.
1.
Tick the “Enable NTP” box and then enter the inter-
val at which the synchronisation should be made
again. Enter the IP address of the NTP server and
the NTP port.
2. Confirm the settings by pressing Apply .
Email
In the event of an alarm, the device can send a message
by e-mail. Enter the e-mail configuration here:
Parameter Setting
Enable Server
Authentica... Tick the box when authentication is
made on the server of the Internet
provider
User Name E-mail account at the provider
Password Password connected to the e-mail
account
SMTP Server SMTP server address of the provider
SMTP Port Enter the SMTP port here
(Default: 25)
Enable SSL Tick the box to activate the e-mail
encryption
Sender Name of the sender
Sender´s
Adresse Corresponding e-mail address for
the e-mail account
Sender´s Recei-
ver Select three possible recipients for
the e-mail
Receiver Enter the name of the recipient here
Receiver´s Ad-
resse Enter the e-mail address of the
recipient here
Enable Attached
Picture Tick the box when camera images
should also be sent with the e-mail
as photo files
Interval Select the interval between the
individual recordings (2 to 5 sec-
onds)
1. Enter the parameters of the e-mail notification.
2. Click on Test to send a test e-mail.
3. Please clarify if your settings are correct and you
have received a confirmation mail. Then click on Ap-
ply.
Note
The device sends an e-mail to the specified recipi-
ents.
If the e-mail is not received, check the settings
and correct them.
If necessary, check the spam filter of your e-mail
client.
Note
Please contact your e-mail provider for SMTP ac-
count settings and configuration.
Please note: E-Mail provider may offer SSL only
encryption for SMTP delivery. This DVR has been
successfully tested for SSL compatibility with
following providers: GMX, Web.de, Gmail, T-
Online.