Abus RM20, Operating And Installation Instructions

Page: 15 / 72

– 15 –
COMMISSIOnInG
First press the unit’s activation
button (I), shown on the opposite
side in the diagram. After the button
has been pushed in, it must be flush
with the unit’s housing. If the smoke
alarm has been activated successfully,
a brief test tone sounds to confirm
activation. This test tone will also
sound when you press the test and
stop button (IV) to verify that the unit
is operating correctly.
fUnCTIOn
The heat alarm function is activated
under the following conditions:
• when the temperature is over 40°C
and rises by more than 4°C in
80 seconds
• If the temperature exceeds 60°C for
more than 8 seconds
• heat alarm tone: single beep, once
a second
• Smoke alarm tone: double beep,
once a second
ChOOSInG A lOCATIOn
As a minimum requirement
RM
,
smoke alarms should be installed in
all bedrooms, children’s rooms and
corridors that function as escape
routes, in the middle of the ceiling.
Bedroom
Kitchen
Living room
Boiler room
Workshop
room
Children’s
room
RM
RM
RM
RM
RM
RM
RM
RM
RM
RM
RM
Bedroom
Bathroom Kitchen
Living room
Children’s
room
Children’s
room
RM
RM
RM RM RM
RM