Abus PPIC46520, Instruction Manual

Page: 12 / 59

12
English
The base of the mount has a so-called parking position for the
camera. Place the camera in the parking position for subsequent
cabling.
Important! Connect the (green-yellow) protective earth
conductor, which is already connected to the cover of the foot at
the factory, to the luster terminal in the camera foot.
If necessary: Use the small guide rail in the camera foot for the
wire. Then correctly connect the power cable of the camera via
the (black) plug to the corresponding connector in the camera
foot.
Note:
The connector is locked in the correct position to prevent
accidental disconnection during further assembly. When
disassembling, take into account the corresponding clamping
mechanism in order not to damage the cabling.
Now remove the camera connected by power cable from the
parking position and screw it back onto the base of the mount.
Make sure that no cables are crushed.
Attach the antenna to the connector on the back of the camera.